• Alloy steel pipe
  • Ductile Iron Pipe
  • Carbon Steel Pipe
  • OCTG Steel Pipe
  • Stainless Steel Pipe
Product
contact us

Address:Beijing Road, Yunhe District, Shengji Building #1802 ,Cangzhou City, Hebei

Contact:Lucky

Phone:86-15003171886

E-mail:jinxiaolong0221@gmail.com
         beitesteelpipe@gmail.com


  • ASTM A524 Grade I, II Seamless Carbon Pipe
Title:
Tel:
E-mail: *
Content: *
Verification Code:
 

  • ASTM A524 Grade I, II Seamless Carbon Steel Pipe
     
     
     
    Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
     
    ASTM A524 Grade I and II Steel Pipe covers seamless carbon steel pipe intended primarily for service at atmospheric and lower temperatures, 
     
     
     
    Materials and Manufacture
    Process:
    1.The steel shall be killed steel made by one or more of the following processes: open-hearth, electric-furnace, or basic-oxygen.
    2.The steel shall be made to fine grain practice.
    3. Steel may be cast in ingots or may be strand cast.
    4. ASTM A524 Grade I and II Steel Pipe NPS 1 1 ⁄ 2 and under may be either hot finished or cold drawn.
    5. ASTM A524 Grade I and II Steel Pipe NPS 2 and over shall be furnished hot finished
     
     


    Heat Treatment:
    All hot-finished and cold-drawn ASTM A524 Grade I, II Seamless Carbon Steel Pipe will be reheated to a temperature above 1550 °F (845°C) and followed by cooling in air or in the cooling chamber of a controlled atmosphere furnace.
     
     
     
    Chemical Composition
     
    Element Grades I and II, Composition, %
    Carbon, max 0.21
    Manganese 0.90–1.35
    Phosphorus, max 0.035
    Sulfur, max 0.035
    Silicon 0.10–0.40
     
     
    Physical Properties
     
     
      Wall Thicknesses   
      Grade I, 0.375 in. (9.52 mm) and under  Grade II, greater than 0.375 in.(9.52 mm) 
    Tensile strength, psi (MPa) 60 000–85 000(414–586)  55 000–80 000 (380–550) 
    Yield strength, min, psi (MPa) 35 000 (240)  30 000 (205) 
      Longitudinal Transverse Longitudinal Transverse
    Elongation in 2 in. or 50 mm, min %: 30 16.5 35 25
    Basic minimum elongation for walls 5 ⁄16 in. (7.9 mm) and over in thickness, strip tests, and for all small sizes tested in full section 22 12 28 20
    When standard round 2 in. or 50 mm gage length test specimen is used for strip tests, a deduction for each 1 ⁄ 32 in. (0.8 mm) decrease in wall thickness below 5 ⁄ 16 in. (7.9 mm) from the basic minimum elongation of the following percentage 1.50 A 1.00 A .... ....
     


    Test
    Flattening Test --For pipe over NPS 2, a section of pipe not less than 2 1 ⁄ 2 in. (63.5 mm) in length shall be flattened cold between parallel plates until the opposite walls of the pipe meet.
     
    Hydrostatic Test Requirements--Each length of pipe shall be subjected to the hydrostatic pressure, 
     
     
     
     
     
    Dimensions, and Permissible Variations
     
    Diameter—Variations in outside diameter

    NPS Designator Permissible Variations in Outside Diameter, in. (mm) 
    Over Under
    1 ⁄ 8 to 1 1 ⁄ 2 , incl 1 ⁄ 64 (0.4) 1 ⁄ 32 (0.8)
    Over 1 1 ⁄ 2 to 4, incl 1 ⁄ 32 (0.8) 1 ⁄ 32 (0.8)
    Over 4 to 8, incl 1 ⁄ 16 (1.6) 1 ⁄ 32 (0.8)
    Over 8 to 18, incl 3 ⁄ 32 (2.4) 1 ⁄ 32 (0.8)
    Over 18 1 ⁄ 8 (3.2) 1 ⁄ 32 (0.8)

    Thickness—The minimum wall thickness at any point shall not be more than 12.5 % under the nominal wall thickness specified.
     

     
     
    Ordering Information
    Orders for material include the following, as required, to describe the desired material adequately:
    1.Quantity (feet or number of lengths),
    2.Name of material (seamless carbon steel pipe),
    3.Grade (Grade I and II),
    4.Manufacture (hot finished or cold drawn),
    5. Size (either nominal wall thickness and weight class or schedule number, or both, or outside diameter and nominal wall thickness, ANSI B36.10),
    6.Length ,
    7.Test report required 
    8. Specification designation,
    9. End use of material, and
    10. Special requirements.

     


     

    HOME |  Company |  Product |  News |  KnowLedge |  Equipment |  Contact | 

    Technical Support:CZWLWL.COM  Address:Beijing Road, Yunhe District, Shengji Building #1802 ,Cangzhou City, Hebei

    Phone:86-15003171886   站长流量统计